| Express Time Systems 1-800-858-7462 |
Please
use our
NEW store
External Buzzer and Control Relay
|
.External Buzzer |
press to
sound buzzer
|
This External Buzzer (approx. 65 dB @ 10 ft.) is fully powered by the Time Station or
TA620 clock terminal. Comes with 14 ft. cable with DIN connector. Measures 3.375"H x
2.50"W x 0.875"D The control relay below is not required to operate this
device. Plugs directly into clock terminal. Suitable for an office environment or where a
low ambient noise level is maintained.
|
.Control Relay |
| The Control Relay can be used with the Time Station or TA620
terminal to facilitate use of other signal devices. In addition,
it can be used with the TA620 to activate electronic door switches for access control
Note-This relay is not suitable for use with the HandPunch 3000 terminal |
01-0121-000
|
Includes two types of relay's
- Dry contact relay :
Max. Load : 5 amps @ 250 VAC or 30 VDC
Fused at 5 amps slo-blo
- Solid-state relay
Input voltage: 120 VAC 50/60Hz
Max. Load: 2 amps @ 250 VAC
Fused at 2 Amps slo-blo
- Each relay is manually switch-able between being activated
by the bell or access control impulse from the clock terminal.
- DIN connector for connection of bar code wand eliminates
need for Y-cable
|
| .Specifications |
| Dimensions: |
8.75"W x 6" H x 2 " D |
| Shipping weight: |
4 lb. |
| Unit color: |
Black |
| Operating Temp.: |
0 to 120 degrees F
|
| Humidity: |
0 to 90% non condensing |
| Cords: |
6 ft. AC power cord and 6 ft. Din interface cable |
| . |
|
 |
|
 |
Typical wiring diagram
of low voltage horns and transformer.
Incoming AC routed through dry contact relay to transformer.Optional bar code wand (TA620 clocks only) connected through
control relay, eliminating need for Y-cable.
Transformer could also be connected
directly to AC output terminals utilizing the sold state AC relay. |
"Specifications and features subject to change without notice" |
top of page |
